DIY Macramé Plant Hanger

Dreaming of bringing that beautiful, bohemian texture into your home without sacrificing your budget? The macramé plant hanger is a timeless piece of functional decor, and it’s surprisingly easy to master—even if you’ve never tied a knot outside of your shoelaces! At HUBGH, we believe this project is the perfect entry point into fiber arts. Using just two simple knots, you can create a stunning, custom hanger that elevates your favorite plant while adding an organic, stylish focal point to any corner.

The Eco-Conscious Cord: Materials & Preparation

• The Cord (Budget-Friendly): You can use dedicated macramé cord (3mm or 4mm thick) or save money by repurposing thick cotton clothesline rope, jute twine, or braided hemp cord from the hardware store. Choose a natural color (cream, natural jute) for a boho look, or a bold color for a modern pop.
• The Structure: A small metal ring (or a sturdy wooden curtain ring/bracelet) for hanging.
• The Tools: Sharp scissors, tape measure, and a large clip or hook to hang the project while you work.

Cord Cutting Guide (For a medium-sized pot, 4-6 inches wide):
Cut four pieces of cord, each 10 feet (3 meters) long.

Simple Steps: Two Essential Knots

Step 1: The Gathering Knot (The Top Loop)
This knot secures all four cords together and creates the hanging loop.

1. Find the Center: Line up all four long cords and fold them in half. Hook the folded end (where the center is) onto your working clip/hook. You now have eight working strands hanging down.
2. Make the Loop: Take a separate small piece of cord (about 12 inches long). Create a small “U” shape with this small piece, laying it over your eight main cords, with the loop facing down.
3. Wrap: Take the long end of the 12-inch cord and tightly wrap it around the bundle of eight cords and over the U-shaped loop. Wrap tightly and neatly, moving down about 1.5 inches.
4. Secure: Feed the wrapping cord’s tail through the small U-loop you left at the bottom. Pull the top cord (the one sticking up from the initial wraps) firmly. This pulls the U-loop and the tail up and under the wraps, locking the knot invisibly. Trim the excess ends close to the wraps.

Step 2: The Square Knot Spiral (The Arm)
This decorative knot creates the hanging arms. We’ll work with four sections of four strands each.

1. Separate: Divide your eight cords into four groups of two cords each. These are your four main arms.
2. Tie the Spiral Knot: Focus on one arm (four strands total). The two center strands are your stationary cords. The two outer strands are your working cords.
   • Take the left outer cord and cross it over the two center cords.
   • Take the right outer cord and pass it under the left cord’s tail and up through the loop on the left side.
   • Repeat this knot only on the left side (left cord over, right cord through) for about 15-20 repetitions. The knots will naturally begin to twist, creating a beautiful spiral effect. Repeat this process on all four arms, making them the same length.

Step 3: The Basket Base (The Pot Cradle)
This row of knots forms the net that holds the plant pot.

1. Measure Down: Measure down about 8-10 inches (or the depth of your pot) from the bottom of your spiral knots. This is where you’ll create the basket.
2. The Connecting Knot: Take the two cords from the left side of one arm and the two cords from the right side of the adjacent arm. Tie a simple Square Knot using this new group of four cords.
3. Repeat: Continue this process, connecting the cords from adjacent arms around the entire circumference. You should end up with four new connecting knots that form a net.

Step 4: The Final Gathering Knot & Fringe

1. Test Fit: Place your pot inside the basket net you just created. If it holds the pot securely, you’re ready for the final knot.
2. Gather: Bring all eight working strands together directly beneath the base of the pot. Tie one final Gathering Knot (just like Step 1) to secure the bottom of the basket.
3. Fringe: Trim the excess cord below the final knot to create a beautiful, uniform fringe (leaving 5-8 inches). Styling Tip: Untwist or brush out the ends of the cord for a soft, fluffy tassel.

Why You’ll Love This Project

Sustainability: By making it yourself, you control the materials, choosing biodegradable cotton or hemp, and you eliminate the plastic packaging that comes with commercial decor.

Affordability: Macramé cord is inexpensive, especially when compared to buying finished, hand-knotted pieces. This creates high-value decor for a small budget.

Creative Focus: This project uses repetition and simple handwork, making it wonderfully relaxing and rewarding. You end up with a unique, beautiful piece of sculptural art that brings life and nature indoors.

Hang your gorgeous new creation and enjoy the view! Try this project and tag HUBGH to share your creation!